When the process is done you will see summary screen.

During the activation will reboot 2 times,

Select Update → SD card → MST2 Activator by Congo and Duke → Start → Next,.

Press and hold MENU button for 3 seconds to enter the Service Mode,.

Copy content of the activator package to the SD card.

Make sure to set the Allocation unit size to the smallest option available (example 4096B),.

Format an SD card with FAT32 file system,.

#Supported firmwaresAlmost all firmwares (Audi and VW, all regions) and series like below:

Diagnostic tool for post-activation coding and adaptation chages (if required).

Press and hold MENU button for 3 seconds, go to Software Update/Versions, find SW Train and confirm that it starts with MST2 and ends with D. You need to format it (or delete its content) to use it.

If the SD card is OK, you should see Test finished without errors message in the log window.This can take some time, depending on the card capacity and read/write speeds. Test will first write data to the SD card, next it will read it back to verify if full capacity of the card is available and data is not corrupted. Make sure that all available space is selected.Press Select target and point to the SD card root directory.Format the SD card with FAT, FAT32, or exFAT file system.Make sure you are using quality product to avoid problems. How to confirm if SD card is OK before using it for firmware update in vehicle.įake SD cards can brick main unit.

Android vcds data download